ΠΥΡΑΝΤΟΧΗ ΑΚΡΥΛΙΚΗ ΜΑΣΤΙΧΗ
- ETA-15/0237
Technical Data
| Odour | Weak |
| Binding agent |
Special dispersion – solventless
|
| Pigments / fillers |
Non-combustible and flame-retardant pigments and fillers
|
| pH-value | Approx. 8 |
| Viscosity |
Trowel grade (630-870 dPas at 20 °C – 22 °C, Haake Viscotester VT-02)
|
| Solids |
66 % – 76 %
|
| Hazard Class | Not hazardous according to Regulation (EC) No. 1272/2008 |
| Equipment cleaning |
Clean with water immediately after use
|
| Consumption |
Approx. 2.05 kg/m2 for a dry film thickness of 1 mm
|
| Surface |
Surfaces must be stable, clean and free of grease and dust; steel and iron parts should be protected against corrosion in case of outdoor applications or in areas where condensed water may be developed
|
| Temperature resistance |
The dried through coatings withstand temperatures from –40 °C to +80 °C, there is neither chemical breakdown, discolouration nor a deterioration in its efficacy.
|
| Toxicity | Not subject to marking according to Ordinance on Hazardous Substances |
| Toxicity of the combustion gases | Toxicologic harmless – analysis of the combustion gases according to DIN 4102 – A2, 08.09.1986, by RWTH Aachen and by Elektrophysik Aachen GmbH, 11.12.1997. |
| Limited oxygen index (LOI) | 58 % – 64 % , measured on approx. 1.5 mm thick films |
| Application temperature | Do not use at temperatures below 5°C |
| Thinner | Clean water, maximum 5 weight percent |
| Moisture- sensitivity | BMS coatings dried through are not susceptible to moisture and can also be used for outdoor applications. |
